M/V Possibilities II massive 175 lb Mantus Anchor ⚓ and ACCO 1/2" HT Anchor Chain pulled up by powerful Vetus Maxwell 48v DC Windlass
![](https://www.peerlesschain.com/media/W1siZiIsInBlZXJsZXNzY2hhaW4vMjAxNi8wNy8yNy84dXhtdW9hNm4wX0FjY29fZzQzX2RvbWVzdGljX2hpZ2hfdGVzdF9pc29fY2hhaW4ucG5nIl0sWyJwIiwiY29udiIsIi1iYWNrZ3JvdW5kIG5vbmUgLXNjYWxlIDQ2MHg3MjAgLWdyYXZpdHkgY2VudGVyIC1leHRlbnQgNDYweDcyMCIseyJmb3JtYXQiOiJwbmciLCJmcmFtZSI6MH1dXQ/Acco-g43-domestic-high-test-iso-chain.png?sha=022069b891c99673)
Manufactured in Mankato Minnesota, ACCO is the only US Domestic Manufacturer of high quality anchor chain. All others are Imports and we've never seen a report of the galvanizing lasting as long as ACCO.
ACCO graciously provided 200' of both Titan 1/2" HT G43 (yes that is from a competitor during covid when supplies were limited) and ACCO 3/8" HT G43 so we can do a long-term comparison. Their chain was matched with new sponsored Maxwell 48v DC Windlass and Anchorlift Windlass and new modern Mantus anchors so we have a complete high quality anchoring system that should hold in all conditions up to nearly 50 mph winds. We eliminated old rope rodes.
A high tensile strength carbon steel anchor (windlass) chain with an ISO short link that provides greater strength-to-weight ratio than proof coil chain. The short link makes it more flexible and ideally suited as a windlass chain. Check the fit or contact windlass manufacturer before purchase. This extra thick hot dip galvanized finish is recommended for all marine applications. ACCO® G43 Domestic High Test ISO Chain is stamped with G4 and is available either in a self-colored or hot dipped glavanized finish. NOT for overhead lifting.
- GRADE 43
- FINISH - Extra hot dip galvanized or self-colored
- Made in USA
- MATERIAL - High tensile strength carbon steel
Download to PDF | Find a Retailer
1/2" SKU: | 500140802 |
Finish | HDG |
Trade Size (in.) | 1/2 |
Wire Dia. (in) | 0.510 |
Inside Dim. Length (Nominal) (in.) | 1.590 |
Inside Dim. Width (Min) (in.) | 0.770 |
Qty. Per Drum | 200 |
Net Weight (Lbs.) | 507 |
Working Load Limit (Lbs.) | 9200 |
Working Load Limit (kg) | 4174 |
3/8" SKU: | 500140632 |
Finish | HDG |
Trade Size (in.) | 3/8 |
Wire Dia. (in) | 0.394 |
Inside Dim. Length (Nominal) (in.) | 1.220 |
Inside Dim. Width (Min) (in.) | 0.600 |
Qty. Per Drum | 400 |
Net Weight (Lbs.) | 595 |
Working Load Limit (Lbs.) | 5400 |
Working Load Limit (kg) | 2450 |