Y Splitter 6" Adapter Wire - 1M2F - One 3.5 mm TRS stereo male plug to two 3.5 mm TSF mono female jacks

Allows 2 ability switches to be plugged into a device with a single stereo jack supporting 2-functions. Expertly designed split a single female TRS stereo jack into two separate, distinct female TSF mono jacks - the standard for almost all ability switches.

For use with

• Physical Book Page Turner for Disabled by Pageflip
• Blueclick Bluetooth Switch Scanning Interface for Android or iOS
• Housemate Environmental Controller ECU + Augmentative Communications for  Android or iOS Smartphones or Tablets
• Cannon EOS SLR Cameras with 2.5mm jack for Remote Shutter/Focus - Pinout 350D, 400D, 450D, 500D, 550D, 600D, 650D, 700D, 60D, 70D 
  • also requires 2.5mm Male to 3.5mm Female Right Angle Adapter Stereo TRS

Methods to Trigger Camera with Ability Switch

• Cannon EOS SLR Cameras have a jack on the side of the camera to remotely trigger focus and shutter. Focus can be left on automatic. Focus (ring) corresponds to pressing the shutter button halfway down and results in focusing the camera. Shutter (tip) corresponds to pressing the shutter button all the way down. In this case the camera is first focused and then triggered if the focusing was successful. In manual-focus mode the camera is triggered instantly. If the camera is in stand-by mode, it can be waken up from stand-by by activating focus (ring).
  • Pinout 350D, 400D, 450D, 500D, 550D, 600D, 650D, 700D, 60D, 70D have 2.5mm female jack (3.3v) Requires a 2.5mm Male to 3.5mm Female Right Angle Adapter + the Y Splitter Adapter we stock - One 3.5mm male stereo jack to Two 3.5mm mono female jacks.  Thse two adapters allow any Ability switch to replace the Canon RS-60E3 wired remote control.
    
    

  • Pinout 20D, 30D, 40D, 50D, 1D, 5D, 6D, 7D,... - These double and single digit Canon cameras have a different connector (for whatever reason). Canon calls it the N3-connector. The only way to get the connector is to cannibalize a cheap wired remote control. The electrical circuit behind the connector equivalent to the xxxD types above.

    
• For other camera manufacturers or models, you can follow 1 of the 2 Canon examples above.  If it doesn't have a standard plug or you cannot find any information online from other users for a DIY external activation, It may be necessary to purchase the remote trigger accessory from the manufacturer and Switch Enable it (modify by adding, soldering 2 wires of a 1/8" (3.5mm) female jack to the remotes buttons)