דלג לתוכן

ברוך הבא אורח

אנא התחברות אוֹ הירשם
דלג למידע על מוצר

Inclusive Inc

Angle Adjustment Plate for Wheelchair Frame Fixed Angle Bracket

WC-AAP

руб5.100,00

נכון לעכשיו, לפריט זה יש מלאי

אנו שולחים ברחבי העולם

בֵּיתִי: 1-5 ימים; בינלאומי: 7-10 יום *הכי הרבה * מס / חובה פטור

  • מעוצב על ידי הנכים
    לנכים
  • שביעות רצון של 100%
    להבטיח
  • משלוח העלות הנמוך ביותר
    מצוטט בעגלה

Picture examples of wheelchairs with hole spacing updated 01-16-11

 

מושגי תנועה לא הושלמו Matrx Pb. Invacare Pronto M41 שלא הוסבר. Invacare Solara לא הועלה

Attachment diagrams for wheelchairs with hole spacing

About the Wheelchair Adapter Plate (WC-AP)

The Wheelchair Adapter Plate (WC-AP) is used to mount to chairs or mounts that have a hole spacing associated with it.
Wheelchairs that have a series of holes along the seat rail can typically be mounted with a WC-AP.
This plate fits 1/4" or 6mm bolts, and spans from 1 inch [25mm] to 2 inches [50mm].

Once attached, the Wheelchair Adapter Plate (WC-AP) can mount to the hardware below:

  • Adjustable Wheelchair Bracket WB(Adjustable)
  • Solid Wheelchair Bracket WB2(Solid)
  • Wheelchair L-Angled Extension Plate WC-LAE
  • לוח מתאם לכיסא גלגלים 2 WC-AP2

Adapter Plate (WC-AP)
Wheelchair Adapter Plate (WC-AP)

Hole Spacing Illustrations. לחץ להגדלה
Wheelchair Frame with Hole Spacing
(Round & Square/Rectangular)



Attaching an Adapter Plate to Wheelchair Frame with Hole Spacing

AP to Holes Illustration. לחץ להגדלה
כלים הדרושים:
  • 3/16" Hex Key (provided with every Mount'n Mover)
  • 7/16" Socket, Box, Open or an Adjustable-End Wrench
הוראות קובץ מצורף
  1. Determine that the hole spacing on the wheelchair is accommodated by the Adapter Plate (WC-AP).
    If there are several options, choose the widest span possible.
    1. Largest hole spacing can accommodate holes spaced up to 2 inches apart [50 mm]
    2. Smallest hole spacing can accommodate holes spaced 1 inches apart [25 mm]
  2. Orient the Adapter Plate to best suit the specific mounting location (it can be flipped so the threaded mounting holes are above or below the bolt points).
  3. Thread both the provided bolts (1/4"-28 x 2" long) through the hole and slot to line up with the wheelchair hole spacing.
  4. Screw the bolts into the provided locknuts, and tighten.

חזרה למעלה

Picture examples of Wheelchairs with Hole Spacing mounted

Example 1: Mounting to Wheelchair Frame with Hole Spacings (Round Tubing).

side view: detail view of attaching the WC-AP. לחץ להגדלה side view: mounted using the WC-AP and WB2(solid). לחץ להגדלה

The picture on the left shows someone lining up the WC-AP to the wheelchair frame holes.
Hole spacing on this particular chair (the Quickie P220) is 1".
Footrest removal is not obstructed in this setup, and the WC-AP could be moved rearward on the wheelchair frame to accomodate if it did.

Components shown: Wheelchair Adapter Plate (WC-AP), and the Solid Wheelchair Bracket WB2 (מוצק)

Example 2: Mounting to Wheelchair Frame with Hole Spacings (Square/Rectangular Tubing).

side view: WC-AP mounted onto rectangular frame with hole spacing

This picture shows an Adapter Plate (WC-AP) attached to a rectangular rail with hole spacing. If you look closely (click on the picture to enlarge) you can see that there are two holes that can be mounted to.
The larger hole spacing is selected in favor of the tighter hole spacing for the broadest base of support.

Components shown: Wheelchair Adapter Plate (WC-AP)

Example 3: Mounting to a pre-existing hardware.

side view: mounting the WC-AP to pre-existing hardware front view: mounting the WC-AP to a Daessy Multiple Hole Adapter

There are many instances where a wheelchair already has some mounting hardware attached.
Assuming that the pre-installed hardware is robust enough, it may be easier for people to mount onto that hardware.
Shown above are the Adapter Plate (WC-AP) mounted onto an unknown mounting system, and onto Daedelus systems Multi Hole Adapter.

Components shown: Wheelchair Adapter Plate (WC-AP), and the Adjustable Wheelchair Bracket WB(adjustable)

אלה רק כמה דוגמאות לאופן בו אנשים מסוימים הרכיבו בהצלחה לכסאות הגלגלים שלהם.
אנו מבינים שכל מקרה שונה, כך שאם יש לך שאלות לגבי הרכבה או Mount'n Mover בכלל,


שאלות נפוצות

הוסף תיאור אופציונלי לסעיף זה

אנו נשלח מידע מעקב לכתובת הדואר האלקטרוני המשויכת להזמנתך לאחר שנשלח הפריט. אם לא קיבלת את פרטי המעקב שלך וזה היה מעל יום עסקים, אנא צור איתנו קשר בטלפון (012) 123 - 4567


העגלה שלך

העגלה שלך כרגע ריקה

רשימת המשאלות שלך