Tobii Dynavox Maestro, T10, T15, V, Vmax, M3, DV4, MT4 Device Plate

Introduction to Device Attachment

To attach your device to the Mount'n Mover system, you will need to determine how your device can attach to the Quick Release Plate (QRP).

Some devices attach directly to the QRP and others require an additional device specific attachment plate.

Device Attachment Guide

Dynavox - Maestro

This device attachment requires the use of the Dynavox Maestro Mounting Bracket, available from Dynavox or BlueSky Designs.
Σας παρακαλούμε επικοινωνήστε μαζί μας if you want to get this thru BlueSky Designs

The back of your device should look like this:

Plate needed: Device Plate DV1 (DP-DV1)

DP-DV1 : Rev 7
My plate looks different!

---

Step 1: Place the shallow spacers

Place the shallow spacers over the top three threaded holes on the Maestro.

• τρία ¹/₈" plastic spacers

Step 2: Attach the Maestro Mount Spacer

Attach the Maestro Mount Spacer over the plastic spacers placed in step 1, using the three screws provided.

• three #8-32 x ½" flat head screws

Step 3: Attach the DP-DV1

Attach the DP-DV1 using:

• two #8-32 x ½" pan head screws

Once all screws are threaded, tighten them down to torque.

Step 4: Attach the QRP

Attach the Quick Release Plate using the four shortest screws.

• four #8-32 x ¼" flat head screws

Dynavox - V or M3

The back of your device should look like this:

Plate needed: Device Plate DV1 (DP-DV1)

DP-DV1 : Rev 7
My plate looks different!
Direct attachment to my QRP

---

Step 1: Attach the DP-DV1

Attach the DP-DV1 to the two threaded holes on the device using the two screws provided.

• two #8-32 x ⅜" pan head screws

Step 2: Attach the QRP

Attach the Quick Release Plate using the four shorter screws.

• four #8-32 x ¼" flat head screws

Dynavox - Vmax

The back of your device should look like this:

Plate needed: Device Plate DV1 (DP-DV1)

DP-DV1 : Rev 7
My plate looks different!

---

Step 1: Attach the DP-DV1

Attach the DP-DV1 to the two threaded holes on the device using the two screws provided.

• two #8-32 x ⅜" pan head screws

Step 2: Attach the QRP

Attach the Quick Release Plate using the four shorter screws.

• four #8-32 x ¼" flat head screws

Ταγκό

Instructions Coming Soon