Παραλείψτε το περιεχόμενο

Καλωσήρθες καλεσμένε

Σας παρακαλούμε Σύνδεση ή κανω ΕΓΓΡΑΦΗ
Παράλειψη πληροφοριών προϊόντος

Mount'n Mover

Tobii Dynavox Maestro, T10, T15, V, Vmax, M3, DV4, MT4 Device Plate

DP-DV1

€70,95

Μόνο, 0 αντικείμενα είναι σε απόθεμα!

Στέλνουμε παγκοσμίως

Οικιακός: 1-5 ημέρες. Διεθνές: 7-10 ημέρες *Οι περισσότερες * Απαλλλάσσονται από φόρο / δασμούς

  • Σχεδιασμένο από τα άτομα με ειδικές ανάγκες
    για άτομα με ειδικές ανάγκες
  • 100% ικανοποίηση
    Εγγύηση
  • Κατώτατο κόστος αποστολής
    Αναφέρεται στο καλάθι

Introduction to Device Attachment

To attach your device to the Mount'n Mover system, you will need to determine how your device can attach to the Quick Release Plate (QRP).

Some devices attach directly to the QRP and others require an additional device specific attachment plate.

Device Attachment Guide

 

Dynavox - Maestro

This device attachment requires the use of the Dynavox Maestro Mounting Bracket, available from Dynavox or BlueSky Designs.
Σας παρακαλούμε επικοινωνήστε μαζί μας if you want to get this thru BlueSky Designs

The back of your device should look like this:
Plate needed: Device Plate DV1 (DP-DV1)

DP-DV1 : Rev 7
My plate looks different!


Step 1: Place the shallow spacers


Place the shallow spacers over the top three threaded holes on the Maestro.
  • τρία 1/8" plastic spacers

Step 2: Attach the Maestro Mount Spacer


Attach the Maestro Mount Spacer over the plastic spacers placed in step 1, using the three screws provided.
  • three #8-32 x ½" flat head screws

Step 3: Attach the DP-DV1


Attach the DP-DV1 using:
  • two #8-32 x ½" pan head screws
Once all screws are threaded, tighten them down to torque.

Step 4: Attach the QRP


Attach the Quick Release Plate using the four shortest screws.
  • four #8-32 x ¼" flat head screws

 

 

Dynavox - V or M3

The back of your device should look like this:
Plate needed: Device Plate DV1 (DP-DV1)

DP-DV1 : Rev 7
My plate looks different!
Direct attachment to my QRP


Step 1: Attach the DP-DV1


Attach the DP-DV1 to the two threaded holes on the device using the two screws provided.
  • two #8-32 x ⅜" pan head screws

Step 2: Attach the QRP


Attach the Quick Release Plate using the four shorter screws.
  • four #8-32 x ¼" flat head screws

 

 

Dynavox - Vmax

The back of your device should look like this:
Plate needed: Device Plate DV1 (DP-DV1)

DP-DV1 : Rev 7
My plate looks different!


Step 1: Attach the DP-DV1


Attach the DP-DV1 to the two threaded holes on the device using the two screws provided.
  • two #8-32 x ⅜" pan head screws

Step 2: Attach the QRP


Attach the Quick Release Plate using the four shorter screws.
  • four #8-32 x ¼" flat head screws

 

Ταγκό

Instructions Coming Soon

If this does not match your device, Παρακαλώ ενημερώστε μας. We want to help.


F.A.Q

Προσθέστε την προαιρετική περιγραφή σε αυτήν την ενότητα

Θα στείλουμε πληροφορίες παρακολούθησης στη διεύθυνση ηλεκτρονικού ταχυδρομείου που σχετίζεται με την παραγγελία σας μόλις αποσταλεί το στοιχείο. Εάν δεν έχετε λάβει τις πληροφορίες παρακολούθησης και ήταν πάνω από 2 εργάσιμη ημέρα, επικοινωνήστε μαζί μας στο (012) 123 - 4567


Tobii Dynavox Maestro, T10, T15, V, Vmax, M3, DV4, MT4 Device Plate

Tobii Dynavox Maestro, T10, T15, V, Vmax, M3, DV4, MT4 Device Plate

€70,95

Το καλάθι σας

Το καλάθι σας είναι άδειο

Η λίστα επιθυμιών σας