[title]
[message]Inclusive Inc
Adapter Plate 4 for Permobil, Quantum, & Jazzy Wheelchair Frames
MtM1151.p
€55,95
-
for the Disabled -
Guarantee -
Quoted in Cart
Attaching an Adapter Plate 2 to a Quantum Wheelchair Frame with Tie-Down
- 1/2" Socket, Box, Open or an Adjustable-End Wrench
- One "Quantum" Bolt (provided in the WC-AP2 packet)
Attachment Instructions
Notes for installation: If possible, we recommend that the wheelchair user not be seated during installation.Try to have the wheelchair tilted as level as possible.
Removing the Quantum Tie-Down
- Remove the bolt that is towards the rear of the wheelchair first.
- Remove the other bolt attached to the tie-down.
Please note if the wheelchair is occupied during installation, be careful to maintain the alignment of the seat rail and the cross-frame (under the seat pan). This is done by re-threading the same bolt thru the back, into the seat rail. - Typically, the shorter bolt attaches to a slide-track nut. This nut may slide out of reach if the wheelchair is tilted. Try and keep this nut in its original location (aligned with the tie-down). Do not lose this slide-track nut.
- Align the WC-AP2 with the Quantum Tie-Down, then screw bolts back into the wheelchair frame. Start with the longer of the two bolts first.
Using the "Quantum" Bolt provided with the WC-AP2, Screw the second bolt into the slide-track nut. - Make sure that both fasteners are engaged in the respective threads, and then torque both fasteners down.
Picture Examples of mounted Quantum Wheelchairs with Tie-Downs
![Mounted Quantum Wheelchair Picture - Side Mounted Quantum Wheelchair Picture - Side](http://www.mountnmover.com/support/WCAttachPics/m_AP2+WCLAE+WB2-side.jpg)
![Mounted Quantum Wheelchair Picture - Isometric Mounted Quantum Wheelchair Picture - Isometric](http://www.mountnmover.com/support/WCAttachPics/m_AP2+WCLAE+WB2-iso.jpg)
![Mounted Quantum Wheelchair Picture - Front Mounted Quantum Wheelchair Picture - Front](http://www.mountnmover.com/support/WCAttachPics/m_AP2+WCLAE+WB2-front.jpg)
Attaching an Adapter Plate 2 to a Permobil Corpus Frame Wheelchair
- 5mm Hex Key (reccommended), or 3/16" Hex Key (provided with every Mount'n Mover)
- Four "Uni-Trac" 6mm Bolts (provided in the WC-AP2 packet)
- Four "Uni-Trac" 6mm Nuts (provided in the WC-AP2 packet)
Attachment Instructions
- Remove the plastic end cover that is on the uni-trac rail.
- Insert the four bolts into the WC-AP2 holes (shown in the diagram). Partially thread the four Nuts onto the ends of the bolts after you do.
- Align the nuts so that the WP-AP2 assembly can enter and slide within the Uni-Trac.
Position the WC-AP2 for best function, and torque all the fasteners down.
Don't forget to replace the cap.
Picture Example of a mounted Permobil Uni-Trac Wheelchair
Attaching an Adapter Plate 2 to a Permobil Uni-Trac Wheelchair
- 5mm Hex Key (reccommended), or 3/16" Hex Key (provided with every Mount'n Mover)
- Three M6x50mm Bolts (use the same ones that attach the thigh support) or,
- Two M6x45mm Bolts (provided in the WC-AP2 packet) or,
Attachment Instructions
With thigh support:- remove the three bolts attached to the thigh support bracket, and remove the unit.
- Sandwich the WC-AP2 with the thigh support bracket, and use the washers on the hole not occupied by the WC-AP2
- Screw down all three bolts, and check that the mounting is properly fastened.
- Attach the WC-AP2 using the two bolts provided in the packet.
- Screw down both bolts, and check that the mounting is properly fastened.
Picture Example of a mounted Permobil Uni-Trac Wheelchair
![Mounted Permobil Corpus Frame, shown without thigh supports Mounted Permobil Corpus Frame, shown without thigh supports](http://www.mountnmover.com/support/WCAttachPics/m_AP2+WB2.jpg)
F.A.Q
Add on optional description to this section
We will send tracking information to the e-mail address associated with your order once the item has shipped. If you have not received your tracking information and it has been over 2 business day, please contact us at (012) 123 - 4567
Related Products
Recently Viewed
Recently Wishlisted
Add on optional description to this section
Let customers speak for us
![Adapter Plate 4 for Permobil, Quantum, & Jazzy Wheelchair Frames](http://inclusiveinc.org/cdn/shop/files/Versatilityv5LightTouchFingertiporMouthGameControllerandJoystickMouseforMD_SMA_ALS_63.png?crop=center&height=600&v=1689111449&width=600)
Adapter Plate 4 for Permobil, Quantum, & Jazzy Wheelchair Frames
€55,95