跳到内容

欢迎来客

登录 或者 登记
跳过产品信息

Broadened Horizons

PageFlip Book Page for disabled

PFLITE001

¥48,600

仅有的, 2 项目 有库存!

我们在全球运送

国内的:1-5天; 国际的:7-10天 *大多数 * 免税

Today's date: Apr 27, 2024

  • 由残疾人设计
    对于残疾人
  • 100%满意
    保证
  • 最低的成本运输
    在购物车中引用

选择控制(向前或向后翻转页面)

  • 无线手或脚踏板开关(对于1臂或腿运动的人) - 不接受能力开关
  • 两个外部能力开关(包括双函数3导体立体声插孔在页面转换器+无线踏板上)确保从配件中添加我们的特殊1到2个分配器适配器,以使用标准Mono 2导体Jacks我们的SIP使用任何两个能力开关-n-puff开关或机器人臂轮椅或床架。

在轮椅或床上安装 跟我们 Robo Arm Mount

翻页是阅读印刷书或杂志的重要辅助过程。然而,这种机械过程是对许多残疾人,老年读者,甚至音乐家的挑战和不便的根源。 PageFlip是一个革命性的电子逐渐转变器,可以解决此问题。可以直接将页面转向器放在桌子,音乐架,厨房柜台,运动设备或任何地方,以便便捷的手提读数。它可以添加到任何轮椅或床上,并以最舒适的眼睛水平和角度保持我们的Robo Arm Mount.

只需将书籍滑入书籍持有器中,将多达10张(20页)预加载到页面插槽中,然后激活设备以开始翻页即可。下面显示了用于夹紧本书和安装页面的设置过程。读者可以通过敲击无线手或脚踏板,按下前面板上的按钮,或使用SIP-N-PUFF或其他能力开关来推进页面或反向方向。我们的机器人自动浏览器旨在提供双向免提解决方案,该解决方案100%可靠,便携,安静且负担得起。可以在用户手册中找到完整的说明。

包括

  • 翻页机
  • 无线手或脚踏板
  • 书夹
  • 餐桌书支持摊
  • 与我们,英国和欧盟插头的交流适配器
  • 携带案件
  • 可选:能力开关控制软件包
    • 输出插孔
    • 分离器/适配器使用任何2个能力开关

特征

  • 书籍厚度:1.3“书脊宽;大约500页
  • 页面大小:4“ x6”至9“ x12”(WXH)
  • 速度:每1.5秒1页
  • 电源:交流适配器(输入:100V-240V,50/60 Hz;输出:6V,300 mA)
  • 便携式:4电池


  • 尺寸:18.5“(w)x 4.3”(h)x 1.5“(d)。注意:基本高度只有2英寸。
  • 重量:12.9盎司(367克)
禁用:
自动翻页器将成为由神经系统障碍,肌肉骨骼问题和普遍弱点引起的双侧上肢功能有限的人的辅助技术。该人群中包括遭受脑血管事故,脊髓损伤,肌萎缩性侧索硬化症(ALS),多发性硬化症,脑瘫和关节炎关节变化的人。自动页面Turner将通过改善这种日常生活活动来提高他们的独立性,从而提高老年人的生活质量。每次20页的阅读课程后,必须有一个护理人员可以连续安装10张床单。此过程可确保一次翻转一页的可靠性。

老年读者:
自动页面Turner为狂热的读者提供方便的书籍支持和翻页功能。它允许他们发现免提阅读的便利。机器人设备可以取代书籍持有人,以与厨房中的食谱,图书馆中的书籍,阅读锻炼设备阅读材料或仅在床上阅读。在下一批床单必须附加到翻页器上之前,免提阅读限制为10张(20页)。这种权衡向读者确保一次只翻到一页。没有其他自动翻页器可以保证。


This patent-pending design guarantees 100% reliability in turning one page at a time. It requires the user, or caregiver, to separate up to 10 sheets (20 pages) at a time into slots that will be individually turned. Subsequent batches of pages will then need to be processed similarly.

我们在全球运送

Manufacturer's Warranty 90 Days
Manufacturer's Support:support@pageflip.com
Manufacturer's Return Policy: 30-days

* Very lightweight paper such as used in some magazines may not work well. Some very lightweight papers tend to fold over and not cooperate well to be turned from the very bottom of the page - the manner in which PageFlip operates.

比较

  • Compare to QiCare at $2500+
  • Compare to Flip Automatic Page-Turner at $3900

指示

1a. INSTALL BOOK (FOR USE ON A TABLE):
1. Unfold the collapsible support stand and place it on a flat surface.
2. Raise the crossbar on the support stand to adjust the book tilt for maximal stability and comfort.
3. Slide the crossbar back into the support stand if it is mistakenly pulled out of the rubber tubing.
4. Rest PageFlip Lite in the bottom groove of the support stand.
5. Open a book to the desired page and attach the book clamp along the center of the bottom edge.
6. Insert the clamp pegs into the rear slots of PageFlip Lite to attach the book to the unit.
7. Click 这里 to see video of installation process.
1b. INSTALL BOOK (FOR BOOKS ON A PIANO / MUSIC STAND):
1. Rest PageFlip Lite on the book ledge of the piano or music stand. No support stand is necessary.
2. Open a book to the desired page and attach the book clamp along the center of the 底部 边缘。
3. Insert the clamp pegs into the rear slots of PageFlip Lite to attach the book to the unit.
4. Stable approach for light books that can be supported by the PageFlip Lite unit sitting on a ledge.
5. For heavy/thick books, please refer to 1C 以下。
6. Click 这里 and scroll down to "Piano / Music Stand Operation" video.
1c. INSTALL BOOK (FOR 重的 BOOKS ON A PIANO / MUSIC STAND):
1. Rest book directly on book ledge of the piano or music stand.
2. Open a book to the desired page and attach the book clamp along the center of the 最佳 边缘。
3. Turn PageFlip Lite upside down and hang it upon the clamp pegs (which are now facing up).
4. Make sure that pegs slide into the rear slots of PageFlip Lite to attach the unit to the book.
5. Be careful that book is heavy enough to support weight of PageFlip Lite. Otherwise, it may topple.
6. This approach is convenient for thick books: no heavy lifting; just clip unit to top of book.
7. Click 这里 and scroll down to "Piano / Music Stand Operation" video
2a。 LOAD PAGES (FOR NORMAL/WIDE PAGES)
1. Press the right button on the panel to move all page-turning arms to the right side.
2. Release up to ten sheets from under the spring-loaded arm of the book clamp.
3. Lay these sheets behind the page-turning arms.
4. Lift the topmost page to be turned from under the page-turning arms.
5. Slide it through the slot of the next available page-turning arm.
6. Press the left panel button to turn the page and expose the next sheet.
7. Repeat steps (4) - (6) for all pages.
8. Rewind the pages by repeatedly pressing the right button.
9. Page loading takes about 3 seconds per page. Loading all 10 page slots takes under a minute.
10. Click 这里 and scroll down to "Page Loading" video.
2b。 LOAD PAGES (FOR NARROW PAGES)
1. Press the right button on the panel to move all page-turning arms to the right side.
2. Release up to ten sheets from under the spring-loaded arm of the book clamp.
3. Lay these sheets over the opposite side of the book.
4. Lift the rightmost page to be turned from the set of loose pages.
5. Slide it below the page-turning arms and weave it up through the rightmost page-turning arm.
6.所有页面重复步骤(4) - (5)。
7.此方法最适合具有狭窄页面的书籍,因为您不会加载更多的手臂。
8.加载方法的页面 2a 如果手臂超出狭窄页面的边缘,则可能会滑下臂。

 

 
Basic
设置

运输政策:

  • 我们运送到美国和国际的所有地点。
  • 通常在1-2个工作日内处理库存订单和运输。
  • 运输费率将根据物品和目的地的大小和重量而有所不同。
  • 加急运输选项可用于额外费用。

顾客评论

基于1个评论 写评论



PageFlip Book Page for disabled

PageFlip Book Page for disabled

¥48,600

你的购物车

您的购物车目前是空的

您的愿望清单