Skip to content

Welcome guest

Please login or register
Skip to product information

Mantus Marine

Mantus M2 Anchor

M2GV175

Dhs. 10,920.00

Only, 0 items are in stock!

We Ship Worldwide

Domestic: 1-5 days; International: 7-10 days *most* Tax / Duty Exempt

  • Designed by the Disabled
    for the Disabled
  • 100% Satisfaction
    Guarantee
  • Lowest Cost Shipping
    Quoted in Cart

DIGS LIKE NO OTHER - Mantus M2 Anchor is designed to penetrate dense grassy bottoms and set with unparalleled holding power. Expect the Mantus Anchor to set every time the first time! Released in 2019, M2 has similar performance characteristics to the M1, but a more compact profile and can roll over without the need for a roll bar.

Inclusive Adventures is a Mantus Dealer with experience. We switched to a Mantus M1 Anchor on Possibilities II and an M2 on Possibilities 1 after two dragging incidents.

As a nonprofit, when you purchase from us, 100% of proceeds support providing Inclusive Adventures experiences that produce a shift in PERSPECTIVE from vulnerable to capable with participants and the community.

Ships from Houston TX USA. Under <150lb ships Ground. Orders over >150lb ships FedEx Freight typically $205 to $300.

EASY TO STORE  Whether you are a long-range cruiser, racing, or going out for a day sail. The Mantus breaks down for easy storage, so you can store one or two as spares without taking up much-needed boat space. A single bolt is used for the construction to facilitate easy disassembly and storage.

BUILT STRONG

  • Formed from high-quality steel plate and high-end precision casting.
  • ASTM-certified bolts are oversized with a large margin to ensure safety.
  • Although the bolt used in the assembly is load-bearing, only a fraction of the load is transmitted to the bolt.
  • Stainless Steel anchors feature a 2205 Duplex shank and 316L stainless steel fluke that are finely polished.
  • In the carbon steel version, every part of the anchor system is hot-dipped galvanized for corrosion protection. (All shanks are HT ASTM 514 Steel and flukes are mild steel A36 equivalent).
  • The nose of the anchor is reinforced to guarantee lifetime longevity.

M2 vs M1 Anchor

Generally, our recommendation is to go with the M1 unless it does not fit. Especially muddy bottoms in rivers, lakes, US Intercoastal, etc

M2 is DESIGNED TO FIT boats with bow sprits and bow pulpits that the M1 with a longer shank and rollbar simply won't fit.

After the release of the Mantus M2 Model, we often get the question: which one is better?  Both Anchors have an amazing setting and resetting ability and both are excellent choices for a primary anchor, but each has its own small specific advantages.  Both anchors roll over well in most bottom conditions and it is rare for a properly weighted anchor to end up upside down, nevertheless,

  • M2 has a shorter shank and eliminating the rollbar provides a better fit for boats with bow pulpits with slotted anchor housing and bow sprits.
  • M2 anchor is less likely to get plugged up with muddy weeds without the need for the roll bar
  • M1 Anchor due to its rollbar is better at rolling over and holds better in really soft, silty, muddy bottoms. M1 Hoop acts like a scoop in the mud, improving holding power.
  • M1 hoop might help prevent chain fouling by wrapping in circles around the shank if the shank tip or ears are not embedded in a harder bottom. 

LIFETIME WARRANTY.   Mantus anchors are covered by a LIFETIME warranty. If at any time you are dissatisfied with our product, please get in touch with us for a replacement or refund. If an anchor becomes damaged we will ship a replacement part – shank, fluke or roll-bar. The galvanized coating on the anchors has a 3-year warranty.

Comment: many customers see 10+ years before needing to regalvanize.  Searching, it appears this might cost $150-$400 depending where and when.

RETURN POLICY. We stand by our product and offer a no questions asked return policy if you find that your anchor does not work as advertised. Follow the link below for more information on returns.  RETURNS 

 

ANCHOR SIZING GUIDE

Use the following guide to determine what size of anchor to use:

When making sizing recommendations for a working anchor we are generally referring to the needs of a cruising boat spending most of its time on anchor. In doing so we try to envelope high sustained winds (50 kts) and assume poor holding conditions (low viscosity bottoms). Some may think these recommendations to be too conservative, especially when compared to sizing tables from other manufacturers. Companies often make claims of superior anchor efficiency, stating that their small anchor X will outperform a much heavier anchor from their competitors, and often use sizing charts as a marketing tool to that end, recommending anchors and anchor systems that are dangerously undersized for their intended use. Comparing surface area can be a good judge of potential holding capability. Our anchor sizing recommendations are presented in the table below and divided into three categories: Lunch Anchor category is recommended for lighter use, expected winds under 30 knots, working anchor for winds under 50 knots, and finally, storm anchor recommendations are intended for winds above 50 knots. These recommendations are made assuming the worst-case scenario, a poor holding bottom, and thus may seem conservative but we believe are accurate.

DIMENSIONS AND FIT 

We HIGHLY recommend from experience to Print an M1 template, Cut it out with scissors, and stick it to a large piece of cardboard to verify fit on your bow. 

Refer to Dimension Image and apply the values below.

M2 MODEL DIMENSIONS (IMPERIAL) INCHES
A B C D E F G H I J K
8 lbs 20 12 12 5 6 1 0 14 10 3 3
13 lbs 23 14 14 6 7 1 0 16 11 3 4
17 lbs 26 16 15 7 8 1 0 18 13 3 4
25 lbs 29 18 17 8 9 1 1 20 14 4 5
35 lbs 32 19 19 8 10 2 1 22 16 4 5
45 lbs 35 21 20 9 11 2 1 24 17 4 5
55 lbs 37 23 22 10 11 2 1 26 18 5 6
65 lbs 39 24 23 10 12 2 1 27 19 5 6
85 lbs 43 27 25 11 13 2 1 30 21 5 7
105 lbs 46 28 27 12 14 2 1 31 22 6 7
125 lbs 50 31 29 13 15 2 1 34 24 6 8
155 lbs 52 32 31 14 16 3 1 36 26 7 8
175 lbs 55 34 33 14 17 3 1 38 27 7 9

 

M2 MODEL DIMENSIONS (METRIC) mm
A B C D E F G H I J K
3.6   kg 516 317 304 135 159 25 9 354 253 65 81
5.9   kg 591 363 348 155 182 29 10 406 290 74 93
7.7   kg 656 403 387 172 202 32 12 451 322 82 103
11.4 kg 731 449 431 191 225 36 13 503 359 92 115
15.9 kg 806 495 476 211 248 40 14 554 395 101 127
20.5 kg 882 541 520 231 271 43 16 606 432 111 139
25.0 kg 947 582 559 248 292 47 17 651 464 119 149
29.5 kg 994 610 586 260 306 49 18 683 487 125 156
38.6 kg 1097 674 647 287 338 54 19 754 538 138 172
47.7 kg 1163 714 686 304 358 57 21 799 570 146 183
56.8 kg 1266 777 747 331 390 62 22 870 621 159 199
70.5 kg 1332 818 785 349 410 66 24 915 653 167 209
79.5 kg 1407 864 830 368 433 69 25 966 690 177 221
 

Assembly

Bolts, Washers, and Nuts are provided with every Mantus Anchor. In the event of replacing a lost fastener, please be sure always to use the proper size. Always use locking washers, or nylon lock nuts, and tighten the nut securely.

Click here to download a printable pdf of the assembly instructions


F.A.Q

Add on optional description to this section

We will send tracking information to the e-mail address associated with your order once the item has shipped. If you have not received your tracking information and it has been over 2 business day, please contact us at (012) 123 - 4567


Your Cart

Your cart is currently empty

Your Wishlist