Skip to content

Welcome guest

Please login or register
Skip to product information

Handicare

HandiCare Track Mounting Accessories for Patient Ceiling Lifts

¥87,000

Available: Ships from Manufacturers Warehouse, Special Order, or Made to Order

We Ship Worldwide Tax & Duty Exempt *If designed exclusively for the for disabled: subject to your customs

USA: 1-5 days, CA / MX 3-10 days, EU 2-10 days, International: 7-10 days.
Ship from Partner Warehouse: 3 days - 3 weeks. Pre-orders / Made-to-Order: ~1+ month.

  • Designed by the Disabled
    for the Disabled
  • 100% Satisfaction
    Guarantee
  • Lowest Cost Shipping
    Quoted in Cart

Quickstart Guide to ordering Handicare / Savaria Track Accessories for both fixed and portable Patient Ceiling Lifts by Mark Felling. Also applies to Prism Medical, Waverly Glen, Medcare, Arjo, and most other brands.

  1. add On-track Charging Accessory (1st 3 lines) for your lift model. A traditional SLA (Sealed Lead Acid) or new Lifepo4 (Lithium Iron Phosphate) Batteries and Charger Kit will also be required (see Complementary Items)

  2. add 1 Track End Stop with Pin (360460) for opposite end of the track from a Charging Track End Stop. Add 2 when used with OMNI Constant Charging Transtrip or a Mid-Track Charging Station.

  3. Decide between mounting to the ceiling or suspending from wall-to-wall which may be more acceptable in rentals where holes in sheetrock walls can be filled after moving out similar to hanging a picture or TV mount on the wall.  A maximum of 26' can be spanned with TrackPlus with 300 lb capacity or 21' with 450 lb capacity. 2 Post Wall Mount System (342100) or Heavy Duty Wall Mount  Brackets Kit (360809) are available or Free-Standing Track Systems.

  4. How many 3" Ceiling Brackets (360461) are needed depends on your installation, track type, and weight capacity requirements. For 450 lb to 600 lb with Standard Track:

    Bottom-up installation screwed directly into studs perpendicular to the track requires 1 GRK RSS Structural Screw (90307) for each 3" bracket:

    • 20" on center requires (1) 3" bracket every 20" of track +1
    • 16" on center studs require (1) 3" bracket every 32" of track +1

    Top-down installation between studs parallel to the track requires every 2 ft or 24": (1) Home Care Hardware Kit (360704) or 2x6 wood block mounted between the studs with 2 structural joist hangers plus

    • (1) 3" Ceiling Bracket every 24" of track + 1 on end
    • (3) 3" Ceiling Brackets for 90-degree (max every 24") and 45-degree curves (max every 38") + appropriate (see #5) 6" Connector Bracket(s) on either end 

    If a ceiling is not level, add 2mm, 3/8", or 1" Aluminum shims between ceiling and 3" brackets. For TIG trusses, commercial suspended ceilings, track suspended from a vaulted ceiling, or other special applications, contact us for a free with order custom detailed design. 

    Also available: 3'' Ceiling Bracket Assembly (1/2" Slot) 360478 for commercial suspended track installs

  5. add (1) 6" Connector Bracket (360462) for each point where two pieces of straight track but into each other.  A 6" Connector Bracket is also needed where a piece of curved track butts into a piece of straight track (or a 2nd piece of curved track). Determine if it is an Outside Profile Curve (360464) or Inside Profile Curve (360465) using this photo as a guide.

  6. Finally, add optional cosmetic End Caps for your type of track.

Bundles of all the mounting accessories you need for a complete, professional, safe installation of 8'2" feet of patient ceiling lift track. Contact us to design a longer custom installation between rooms, with curves, X-Y Gantry style to reach any point within a room, or wall mount, free span, cantilever,  vaulted ceilings, commercial or suspended ceilings. 

We offer everything you need for a complete solution! New, refurbished, gently used, both fixed and portable ceiling lifts, carry bars, independent body lifters, slings, batteries,  Chargers, and pre-wired harnesses for DIY installation or by your favorite handyman with coaching, guidance, and install support from an electrical and rehabilitation engineer with 22+ years experience by video call.

Bundle of everything needed for bottom-up mounting 8 ft track direct to perpendicular trusses

  • (4) 360461 3'' Ceiling Bracket Assembly (3/8" Slot) - 4 per 8' pc of track
  • (4) 5/16" x 3-1/2" GRK’s RSS™ Rugged Structural Torx Screw - for bottom-up direct to perpendicular trusses 
  • (2) 360460 Track End top w/pin & ring (can substitute 3/8"x3" bolt & nut)
  • (2) 360419 Standard Track White Molded Styrene End-cap (cosmetic not required)

Bundle of everything needed for bottom-up mounting of 8 ft track between parallel trusses

  • (4) 360704 Homecare Hardware Kit - 1 for every 2' of track - for bottom-up between parallel trusses (each kit already includes 360461 3'' Ceiling Bracket Assembly 3/8" Slot)
  • (2) 360460 Track End top w/pin & ring (can substitute 3/8"x3" bolt & nut)
  • (2) 360419 Standard Track White Molded Styrene End-cap

Choices for On-Track Charging 

  1. 8 ft of Omni Transstrip for Handicare C-Series Omni Constant Charging Lifts - 363959. Conveniently charges anywhere along the full length of the track
  2. On Track Charging Endstop w/pin & ring for Handicare C-Series Lifts - 363791.  Push the lift to one end of the track to engage with the charging end stop.
  3. Plug Charger Directly into Lift or other brand

Requires

  • 8 Ft Track (not included)
  • *for 16 ft double everything but substitute (1) 6'' Ceiling Bracket Assembly (3/8" Slot) to join the two 8ft pcs of track for (1) 360461 3'' Ceiling Bracket Assembly
  • Fixed Patient Lift with built-in Trolley or a standalone trolley with slot or hole to hook a Portable Patient Lift into
  • Carry Bar for Sling and Sling or Independent Body Lifter
  • Choice of On-track charging  methods or accessories
  • Batteries and Charger for lift and Wire Harness if utilizing on-track charging
  • optional scale

Add-on Options or Complementary

  • HandiCare Track Mounting Accessories for Patient Ceiling Lifts (This item)

    ¥87,000

  • Patient Ceiling Lift Batteries, Charger, & Wire Harness Kit

    ¥43,700

  • Ceiling Track for Patient Ceiling Lifts by HandiCare, Arjo (& most brands)

    Regular price   ¥82,900 Sale price   ¥55,800

  • Carry Bars for Patient Ceiling Lifts

    Regular price   ¥76,500 Sale price   ¥55,800

  • Handicare XY Gantry System Trolleys

    Regular price   ¥351,500 Sale price   ¥190,700

  • Like New or Gently used Patient Ceiling Lifts - 1 or 2 Year Same-as-New Warranty

    ¥477,000


Description

Quickstart Guide to ordering Handicare / Savaria Track Accessories for both fixed and portable Patient Ceiling Lifts by Mark Felling. Also applies to Prism Medical, Waverly Glen, Medcare, Arjo, and most other brands.

  1. add On-track Charging Accessory (1st 3 lines) for your lift model. A traditional SLA (Sealed Lead Acid) or new Lifepo4 (Lithium Iron Phosphate) Batteries and Charger Kit will also be required (see Complementary Items)

  2. add 1 Track End Stop with Pin (360460) for opposite end of the track from a Charging Track End Stop. Add 2 when used with OMNI Constant Charging Transtrip or a Mid-Track Charging Station.

  3. Decide between mounting to the ceiling or suspending from wall-to-wall which may be more acceptable in rentals where holes in sheetrock walls can be filled after moving out similar to hanging a picture or TV mount on the wall.  A maximum of 26' can be spanned with TrackPlus with 300 lb capacity or 21' with 450 lb capacity. 2 Post Wall Mount System (342100) or Heavy Duty Wall Mount  Brackets Kit (360809) are available or Free-Standing Track Systems.

  4. How many 3" Ceiling Brackets (360461) are needed depends on your installation, track type, and weight capacity requirements. For 450 lb to 600 lb with Standard Track:

    Bottom-up installation screwed directly into studs perpendicular to the track requires 1 GRK RSS Structural Screw (90307) for each 3" bracket:

    • 20" on center requires (1) 3" bracket every 20" of track +1
    • 16" on center studs require (1) 3" bracket every 32" of track +1

    Top-down installation between studs parallel to the track requires every 2 ft or 24": (1) Home Care Hardware Kit (360704) or 2x6 wood block mounted between the studs with 2 structural joist hangers plus

    • (1) 3" Ceiling Bracket every 24" of track + 1 on end
    • (3) 3" Ceiling Brackets for 90-degree (max every 24") and 45-degree curves (max every 38") + appropriate (see #5) 6" Connector Bracket(s) on either end 

    If a ceiling is not level, add 2mm, 3/8", or 1" Aluminum shims between ceiling and 3" brackets. For TIG trusses, commercial suspended ceilings, track suspended from a vaulted ceiling, or other special applications, contact us for a free with order custom detailed design. 

    Also available: 3'' Ceiling Bracket Assembly (1/2" Slot) 360478 for commercial suspended track installs

  5. add (1) 6" Connector Bracket (360462) for each point where two pieces of straight track but into each other.  A 6" Connector Bracket is also needed where a piece of curved track butts into a piece of straight track (or a 2nd piece of curved track). Determine if it is an Outside Profile Curve (360464) or Inside Profile Curve (360465) using this photo as a guide.

  6. Finally, add optional cosmetic End Caps for your type of track.

Bundles of all the mounting accessories you need for a complete, professional, safe installation of 8'2" feet of patient ceiling lift track. Contact us to design a longer custom installation between rooms, with curves, X-Y Gantry style to reach any point within a room, or wall mount, free span, cantilever,  vaulted ceilings, commercial or suspended ceilings. 

We offer everything you need for a complete solution! New, refurbished, gently used, both fixed and portable ceiling lifts, carry bars, independent body lifters, slings, batteries,  Chargers, and pre-wired harnesses for DIY installation or by your favorite handyman with coaching, guidance, and install support from an electrical and rehabilitation engineer with 22+ years experience by video call.

Bundle of everything needed for bottom-up mounting 8 ft track direct to perpendicular trusses

  • (4) 360461 3'' Ceiling Bracket Assembly (3/8" Slot) - 4 per 8' pc of track
  • (4) 5/16" x 3-1/2" GRK’s RSS™ Rugged Structural Torx Screw - for bottom-up direct to perpendicular trusses 
  • (2) 360460 Track End top w/pin & ring (can substitute 3/8"x3" bolt & nut)
  • (2) 360419 Standard Track White Molded Styrene End-cap (cosmetic not required)

Bundle of everything needed for bottom-up mounting of 8 ft track between parallel trusses

  • (4) 360704 Homecare Hardware Kit - 1 for every 2' of track - for bottom-up between parallel trusses (each kit already includes 360461 3'' Ceiling Bracket Assembly 3/8" Slot)
  • (2) 360460 Track End top w/pin & ring (can substitute 3/8"x3" bolt & nut)
  • (2) 360419 Standard Track White Molded Styrene End-cap

Choices for On-Track Charging 

  1. 8 ft of Omni Transstrip for Handicare C-Series Omni Constant Charging Lifts - 363959. Conveniently charges anywhere along the full length of the track
  2. On Track Charging Endstop w/pin & ring for Handicare C-Series Lifts - 363791.  Push the lift to one end of the track to engage with the charging end stop.
  3. Plug Charger Directly into Lift or other brand

Requires

  • 8 Ft Track (not included)
  • *for 16 ft double everything but substitute (1) 6'' Ceiling Bracket Assembly (3/8" Slot) to join the two 8ft pcs of track for (1) 360461 3'' Ceiling Bracket Assembly
  • Fixed Patient Lift with built-in Trolley or a standalone trolley with slot or hole to hook a Portable Patient Lift into
  • Carry Bar for Sling and Sling or Independent Body Lifter
  • Choice of On-track charging  methods or accessories
  • Batteries and Charger for lift and Wire Harness if utilizing on-track charging
  • optional scale

Related Documents

Handicare Ceiling Lifts Track Installation Manual rev 12-05-2023
Handicare Fixed and Portable Ceiling Lifts Track Installation Manual rev 12-05-2023 //inclusiveinc.org/cdn/shop/files/Handicare_Ceiling_Lifts_Installation_Manual_revision_12-05-2023.pdf?v=4939540229710811327

Handicare Fixed and Portable Patient Ceiling Lifts Planning Guide (branded Prism Medical)
Handicare Fixed and Portable Patient Ceiling Lifts Planning Guide (branded Prism Medical) shows all the possibilities with parts and accessory components. Mark felling Inclusive's Rehabilitation Engineer will design a custom lift solution to your needs and specifications. $250 Consultation fully credited to the purchase of a lift system. //inclusiveinc.org/cdn/shop/files/Handicare_branded_Prism_Planning_Guide.pdf?v=9210673685083442649

Handicare Ceiling Lift Homecare Brochure US
Handicare Patient Ceiling Fixed Lift and Track Homecare Brochure for USA //inclusiveinc.org/cdn/shop/files/Handicare_Ceiling-Lift-Homecare_US-Brochure.pdf?v=7738724322043022932

Selected Variant

10.0 lb

F.A.Q

We will send tracking information to the e-mail address associated with your order once the item has shipped. If you have not received your tracking information and it has been over 2 business day, please contact us at (012) 123 - 4567


Your Cart

Your cart is currently empty

Your Wishlist